Follow these easy steps to get your Zanussi TCS 603 Dryer up and running in no time.
For your convenience, position the machine close to your washing machine. Ensure the tumble dryer is installed in a clean place to prevent dirt from building up. Avoid installing it on floors that are not resistant to high temperatures, as this could interfere with its operation.
This machine is designed to operate on a 220-230 V, single-phase, 50 Hz supply. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
A special stacking kit is available to enable mounting the dryer on top of your washing machine, which can be acquired through your dealer.
If there is a sink or drain nearby, discharge the condensed water directly through a hose. Remove clamp A, pull out plug B, insert drain hose C, and fasten it to the appliance using clamp A.
Ensure the appliance is level using a spirit level. Adjust the feet if necessary, but do not remove them. Proper leveling minimizes vibration and noise.
Before using your tumble dryer for the first time, place a few damp cloths inside and run a drying program for about 20 minutes to remove any dust.
Open the door by pressing the relevant button, load items one at a time, shaking them out loosely, and close the door ensuring no laundry is caught between the door and filter.
Leave the door slightly ajar when not in use to preserve the seal. Clean the fluff filter after each use to prevent fire risks. Do not use the appliance if the fluff filter is damaged or missing.